Frequency response |
± .5dB, 2Hz to 30kHz at rated output. -3dB points below 0.3Hz and above 80kHz. |
Distortion (THD) |
Less than .01% at 2V RMS balanced output |
Noise & hum |
25µV RMS residual IHF weighted balanced noise output with gain control at minimum, 98dB below 2V RMS output |
Gain |
Main output: 12.5dB balanced, 6.5dB SE |
|
Tape output: 0dB |
Input impedance |
200K ohms balanced, 100K ohms SE |
Output impedance |
600 ohms balanced, 300 ohms SE Main (2), 40K ohms minimum load and 1000pF maximum capacitance. |
Output polarity |
|
Maximum input |
14V RMS maximum balanced, 7V RMS SE |
Rated outputs |
2V RMS (1V RMS SE) into 200K ohm balanced load (maximum balanced output capability is 30V RMS at less than 1% THD at 1kHz |
Power supplies |
Electronically regulated low and high voltage supplies. Automatic 30 second warmup mute. Automatic brown-out mute. |
Tube complement |
(4) 6922/ECC88 dual triode. (Vacuum tube audio circuit, solid-state power supply) |
Power requirements |
100-135VAC 60Hz (200-270VAC 50/60Hz) 35 watts maximum |
Other |
Inputs: SE1, SE2, SE3, SE4, Bal, Direct (Bal) and Monitor (SE) |
|
Outputs: 2 Main Bal, 1 Main SE, 1 Record SE |
Dimensions |
19" (48 cm) W x 5.25" (13.3 cm) H (standard rack panel) x 10.5" (26.7 cm) D. Handles extend 1.50" (3.8 cm) forward of the front panel. |
Weight |
11.6 lbs. (5.3 kg) Net; 20 lbs.(9.1 kg) Shipping. |